XML-FAL01AM8N2 Servo motor
- 230 VAC, 100 W
- 40mm flange, 8mm shaft, 0.32/0.96Nm, 3000/5000rpm
- Absolute 18 bit multi turn encoder (262144 ppr)
- Low inertia
- Brake
Beschrijving
- Servo drive LS Mecapion.
- 230 VAC, 100 W
- 40mm flange, 8mm shaft, 0.32/0.96Nm, 3000/5000rpm
- Absolute 18 bit multi turn encoder (262144 ppr)
- Low inertia
- Brake
Specifications
General description
| Article number | XML-FAL01AM8N2 |
| Applicable drive | L7xA001-2 |
Mechanical
| Inertia | 0.0023 kg•cm² |
| Flange size | 40 mm |
| Shaft diameter | 8 mm |
| Shaft type | Smooth |
| Maximum shaft axial force | 39 N |
| Maximum shaft radial force | 148 N |
| IP Class | IP65 (exkluding shaft penetration) |
| Weight | 0.45 kg |
Ambient conditions
| Environment | Avoid direct sunlight, no corrossive gas, inflammable gas, oil mist or dust |
| Humidity | 90% RH or less (no condensation) |
| Temperature range | Operating: 0 to 40 C°, Storage: -10 to +60 C° |
| Vibration | 5G |
Encoder
| Encoder type | Absolute multi-turn 18bit (262144ppr) |
Output ratings
| Rated power | 100 W |
| Rated speed | 3000 rpm |
| Rated torque | 0.32 Nm |
| Maximum torque | 0.96 Nm |
Tuning
| Allowed load inertia ratio | 30 times motor inertia |
Standard compliances
| Applied directives | EMC Directive: EN 60034-1:2010 Low Voltage Directive: EN 60034-5:2001 + A1:2007 |
Brake
| Holding brake | Yes |
| Holding torque | 0.32 Nm |
| Brake coil voltage | 24 VDC |
| Brake coil current | 0.25 A |
